ACOM 1000

AMPLIFICATORE HF / 50 MHZ VALVOLARE NUOVA VERSIONE

Technical Specifications

• Frequency Coverage: All amateur bands 1.8-54MHz; extensions and/or changes on request.
• Power Output: 1000W PEP or continuous carrier, no mode limit.
• Intermodulation Distortion: Better than 35dB below rated output.
• Full-BK (QSK) supported
• Hum and noise: Better than 40dB below rated output.
• Harmonic Output Suppression:
  • 1.8-29.7MHz - better than 50dB below rated output;
  • 50-54MHz - better than 66dB below rated output.
• Input and Output Impedances:
  • nominal value: 50 Ω unbalanced, UHF (SO239) type connectors;
  • input circuit: broadband, VSWR less than 1.3:1, 1.8-54MHz continuously (no tunings, no switching);
  • bypass path VSWR less than 1.1:1, 1.8-54MHz continuously;
  • output matching capability: better than VSWR 3:1 or greater at reduced output levels.
• RF Gain: 12.5dB typically, frequency response less than 1dB (50 to 60W drive power for rated output).
• Primary Power: 170-264V (200, 210, 220, 230 & 240V nominal taps, 100, 110 & 120V taps on request, +10%-15%tol.), 50-60Hz, single phase, 2000VA consumption at rated output.
• Complies with CE safety and EMC requirements, as well as FCC-regulations (6,10 & 12m bands lock provided).
• Size & Weight (operating): WxDxH: 422x355x182mm, 18kg.
• Operating environments:
  • temperature range: 0...+50 degs.Celsius;
  • humidity: up to 75% @ +35 degs.Celsius.
  • height: up to 3000m above sea level without output deterioration