ACOM 1010

AMPLIFICATORE  HF VALVOLARE ULTIMA VERSIONE

Technical Specifications

• Frequency Coverage: All amateur bands in the 1.8-29.7MHz frequency range.
• Power Output: 700 W PEP or 500 W continuous carrier.
• Intermodulation Distortion: Better than 35 dB below rated output.
• Hum and noise: Better than 40 dB below rated output.
• Harmonic Output Suppression: Better than 50 dB below rated output.
• Input and Output Impedances:
  • nominal value: 50 Ω unbalanced, UHF (SO239) type connectors;
  • input circuit: broadband, VSWR less than 1.3:1, 1.8-30MHz continuously (no tunings, no switching);
  • Bypass path VSWR less than 1.1:1, 1.8-30MHz continuously, 200 W maximum;
  • Output (antenna) impedance matching capability: VSWR up to 3:1 or higher.
• RF Gain: 11dB typically, frequency response less than 1dB (50 to 70 W drive power for rated output). Primary Power: 85-132 V/170-264 V ac (100, 110, 120, 200, 210, 220, 230 & 240 V nominal taps), +10% -15% tol.), 50-60 Hz, single phase, 1200 VA.
• Complies with CE safety and electromagnetic compatibility requirements as well as FCC-regulations (10 & 12 m band locks provided).
• Size & Weight (operating): WxDxH: 406x315x150mm, 16kg.
• Operating environments:
  • temperature range: 0...+50 °C
  • humidity: up to 95% @ +35 °C
  • height: up to 3000m above sea level without output deterioration